MAINTENANCE OF THE STRAIGHT LINE RIP SAW(Based on 40 hour week) |
D A I L Y |
M O N T H L Y |
6 M O N T H S |
| Clean the air filter in the moisture trap (if applicable). | X | ||
| Check the operation and condition of the anti-kickback finger assemblies. | X | ||
| Clean the pressure bar at the end of each day. | X | ||
| Clean the saw pit at the end of each day. | X | ||
| Clean the feed chains at the end of each day. | X | ||
| Clean around and under the frame at the end of each day. | X | ||
| Inspect the feed chains and chain race for wear and adjustment. | X | ||
| Inspect the pressure bar for wear. Repair or replace as needed. | X | ||
| Inspect the arbor belt for wear (if applicable). Adjust tension. Replace as needed. | X | ||
| Inspect the Arbor brake for wear (if applicable). Replace as needed. | X | ||
| Switch the feed chains side to side. | X |