MAINTENANCE OF THE THROUGH FEED MOULDER(Based on 40 hour week) |
D A I L Y |
T W I C E A W E E K |
M O N T H L Y |
6 M O N T H S |
Clean the machine. | X | |||
Check spindles for noise and vibration. | X | |||
Check and clean feedrolls. | X | |||
Clean the enclosure. | X | |||
Adjust the feed speed through entire range. | X | |||
Check and clean moisture trap. | X | |||
Check and clean air cylinders. | X | |||
Check for loose bolts. | X | |||
Check spindle belt tension. | X | |||
Check drive couplings for wear. | X | |||
Check U-joints for wear. | X | |||
Check and clean beam lift screws and nuts. | X | |||
Remove and clean bed plates. | X | |||
Check and clean chipbreaker. | X | |||
Check and clean spindle slides and adjustment screws. |
X | |||
Check spindle belts for wear. | X | |||
Check spindles for run out. | X | |||
Check alignment of bed plates. | X | |||
Check alignment of side guides. | X | |||
Check chipbreaker. | X | |||
Check spindle yoke clamps. | X |
Questions?
We can easily be reached by phone or fax:
Telephone: 260.563.2102
Main Fax: 260.563.0206
If you prefer to send us an email, please check our contact page to easily get in touch with whoever you need!